Conduit & Conduit Fittings
1-1/4" Electrical Metallic Tubing 90 Degree Elbow, Galvanized Steel, Use To Make A 90 Degree Change Of Direction In A Run Of Electrical Metallic Tubing Conduit, UL Listed.
1-1/2" Electrical Metallic Tubing 90 Degree Elbow, Galvanized Steel, Use To Make A 90 Degree Change Of Direction In A Run Of Electrical Metallic Tubing Conduit, UL Listed.
2" Electrical Metallic Tubing 90 Degree Elbow, Galvanized Steel, Use To Make A 90 Degree Change Of Direction In A Run Of Electrical Metallic Tubing Conduit, UL Listed.
3/4" Water Tight Connector, For Underground Feeder Cable, Die Cast Zinc, Use To Terminate & Seal Type UF Cable To Threaded Entry Of A Watertight Enclosure.
1 1/4" Insulated Metallic Grounding Bushings, Tin-Plated Open-Type Lug, Dual Rated For CU-AL Conductors, Thermoplastic Liners Rated 105 Degrees Celsius, Die Cast Zinc, Used To Provide A Smooth, Well-Rounded Bearing Surface For Wires Or Cable At The End Of Threaded Conduit Or A Conduit Connector As Required By The NEC, Lay-In Type Lug Provides For Easy Attachment Of A Grounding Conductor, UL & CSA Approved.
3/4", 90 Degree, Angle 2 Screw Clamp Connector, For Armored Cable & Flexible Metal Conduit, Use To Terminate Either Type AC Armored Cable Or Flexible Metal Conduit To A Knockout In A Dry Location Box Or Enclosure, UPC Poly Bag.
1/2" Electrical Metallic Tubing Inside Corner Pull Elbow. Die Cast Zinc. Use To Facilitate Pulling Conductors Through A Sharp Bend In A Run Of Electrical Metallic Tubing In Dry Locations Where Obstructions Limit The Space Beyond The Connecor Such As Inside A Corner.
1/2" Rigid To Rigid Corner Pull Elbow, Use To Facilitate Pulling Conductors Through A Shared Bend In A Run Of Threaded Rigid Conduit Or IMC, The Removable Cover Gives Ample Access So That Wire Pulling Can Be Achieved Without Obstructions.
3/4" Rigid To Rigid Corner Pull Elbow, Use To Facilitate Pulling Conductors Through Shared Bend In A Run Of Threaded Rigid Conduit Or IMC, Removable Cover Gives Ample Access So Wire Can Be Pulled Without Obstruction.
1/2" Rigid Offset Nipple, Die Cast Zinc, Use To Provide An Offset Connection Betweeen 2 Boxes, Cabinets, Or Enclosures.
1-1/4", 30 Degree, Schedule 40, PVC Meter Offset, Socket On 1 End With Threads On Offset, Brings Services Into Meter Box.
2", 30 Degree, Schedule 40, PVC Meter Offset, Socket On 1 End With Threads On Offset, Brings Services Into Meter Box.
